Makino D200Z牧野矢量刀轴后处理分享，带刀心输出

raylau920 · 发表于 2022-4-22 19:53:43

%
(0004)
N1 (------WORK PART : 0004)
N2 (------NC PGM Creat Time : 2022-04-22 19:49)
N3 (------Machine Tool : Makino D200Z)
N4 (------Controler : Control Fanuc 31i)
N5 (------POST_AUTHOR WeChat : 13121252425)
N6 (------)
N7 G69
N8 G21
N9 G40G17G90G80G49
N10 G0 G91 G28 Z0.
N11 M11 M13 (UNLOCK)
N12 G90 G53 X-220. Y-130.
N13 G0 G90 B0.
N14 G0 G90 C0.
N15 (created by hyperMILL 2020.2 OPEN MIND Technologies AG)
N16 (------------ TOOL_LIST START------------)
N17 (T5 Tool Name: D6-QD-24 TD: 6.0 R: 3 TL: 24.0 ER16-L150-D28)
N18 (------------ TOOL_LIST END ------------)
N19 (----------------------------------------)
N20 (OPERATION 5)
N21 (D6-QD-24)
N22 M01
N23 (T5 Tool Name: D6-QD-24 TD: 6.0 R: 3 TL: 24.0 ER16-L150-D28)
N24 T5 M06
N25 G49 (RTCP OFF)
N26 G69 (PLANE_REST)
N27 G28 G91 Z0.
N28 G90
N29 G0 G90 G54
N30 M03 S11671
N31 #11199= 0
N32 #11199=[#11005-#11199]
N33 M11 M13 (UNLOCK)
N34 M258 (5X HSM ON)
N35 G0 B21.09 C96.599
N36 G68.2 X-0.9 Y-12.7 Z27. I179.16239013 J15.00000000 K180.00000000
N37 G53.1
N38 G0 X0. Y0.
N39 G0 G43 H199 Z0.
N40 G49
N41 G69
N42 G90 G54
N43 G0 G43.5 H199 (RTCP ON)
N44 G0 X-0.9 Y-12.7 Z27. I0.00378355 J0.25879139 K0.96592583
N45 G0 Y-13.5 Z-5.8 I0.00378355 J0.25879139 K0.96592583
.
.
.
N709 G1 X0.5 Y-15.1 I0.00000000 J0.25881905 K0.96592583
N710 G1 X0.6 Y-15. I0.00000000 J0.25881905 K0.96592583
N711 G1 X0.7 Y-14.9 I0.00000000 J0.25881905 K0.96592583
N712 G1 X0.8 Y-14.7 I0.00000000 J0.25881905 K0.96592583
N713 G1 X0.9 Y-14.5 I0.00000000 J0.25881905 K0.96592583
N714 G1 Y-14.4 I0.00000000 J0.25881905 K0.96592583
N715 G1 Y-14.2 I0.00000000 J0.25881905 K0.96592583
N716 G1 Y-14. I0.00000000 J0.25881905 K0.96592583
N717 G0 Y-13.2 Z-9. I0.00000000 J0.25881905 K0.96592583
N718 G0 Z27. I0.00000000 J0.25881905 K0.96592583
N719 (----------------------------------------)
N720
N721 G49 (RTCP OFF)
N722 G69 (PLANE_REST)
N723 M05 M09
N724 G0 G91 G28 Z0.
N725 M11 M13 (UNLOCK)
N726 G90 G53 X-220. Y-130.
N727 G0 G90 B0.
N728 G0 G90 C0.
N729 M30
%

桃爱罗 · 发表于 2024-6-4 07:58:42

大佬的分享

YBB1234567 · 发表于 2023-6-30 17:04:00

感谢大佬分享哦！很实用呢！支持一下！赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞！

WZR244 · 发表于 2023-6-16 02:17:58

感谢大佬的分享

zhacker001 · 发表于 2023-5-17 10:24:13

感谢大佬的分享

fbph2003 · 发表于 2023-5-11 11:53:35

刀心输出这个变量还是不方便

gsphzc · 发表于 2023-5-7 10:45:56

谢谢楼主的无私分享

zxhore1998 · 发表于 2023-5-2 08:57:49

感谢楼主分享

jackyzjg · 发表于 2022-11-22 22:10:59

好东西，顶你

tgw167 · 发表于 2022-9-14 20:47:50

支持楼主分享

[分享] Makino D200Z牧野矢量刀轴后处理分享，带刀心输出

相关帖子