锁定程序
有谁知道锁定程序，刀在在刀具列表中怎么做到不输出。{:lol:}{:lol:}{:lol:}{:handshake:}{:handshake:}{:handshake:} ZhuaiGG 发表于 2019-10-14 15:26
锁定后跳过不处理这个操作，那也可以用同样的条件，跳过刀具信息的输出
没跳过，我跳不过{:lol:}{:lol:} 本帖最后由 邵阳_新邵_一刀 于 2019-10-18 09:19 编辑
zcx461 发表于 2019-10-18 08:31
后处理可以加个判断，跳过锁定程序
我不懂TCL文件怎么写啊我的刀具列标#PB_CMD_endofnc
set outputthd 1
global mom_tool_name
global mom_tool_diameter cccc
global mom_tool_diameter
global mom_tool_corner1_radius
global mom_tool_corner1_radiusglobal
global mom_tool_flute_length
global mom_tool_corner1_radius mom_tool_lower_corner_radius
global mom_tool_type
global mom_tool_point_angle
global mom_tool_nose_radius
global mom_sys_tool_stack
set mom_tool_name
set tdi [ format"%-6.2f" $mom_tool_diameter]
if {$mom_tool_type == "Milling Tool-T Cutter"} {
set tr
} else {
set tr
}
#set tr [ format"%-5.2f" $tr]
#set tr
#MOM_output_literal "(刀具名及大小:$mom_tool_name,D$tdi,R$tr)"
global mom_tool_adjust_register mom_tool_cutcom_register
global mom_cutcom_adjust_register
global mom_tool_adj_reg_defined
global mom_tool_number
if {
set tt $mom_tool_number
} else {
set tt 0
}
if {$mom_tool_adj_reg_defined == 1} {
set th $mom_tool_adjust_register
} else {
set th 0
}
if {
if { $cccc==1} {
set td $mom_tool_cutcom_register
} else {
set td 0
}
} else {
set td 0
}
set tt
set th
set td
if {$outputthd == 1 } {
# MOM_output_literal "(刀具号各补偿号.:T$tt,H$th,D$td)"
} else {
# MOM_output_literal "(刀具号各补偿号:T00,H00,D$td)"
}
global mom_stock_part side
global mom_stock_floor
global mom_stock use floor same as side
global mom_operation_type
global mom_motion_type
set xystock 0
set zstock 0
if {
set xystock
set zstock
}
if {$mom_operation_type == "point to point"} {
set xystock 0
set zstock 0
}
#MOM_output_literal "(XY=MM,Z=MM)"
#output tool info
global ptp_file_name
global tool_lists_file_name
global ino
global mom_group_name mom_output_file_suffix mom_output_file_basename
global mom_sys_max_travel
global mom_sys_min_travel
global mom_machine_time
global mom_toolpath_lock_option mom_operation_name
#MOM_output_literal"操作 $mom_operation_name"
if {$mom_toolpath_lock_option == "Yes"} {
MOM_skip_handler_to_event "MOM_tfile"
}
set tool_lists_file_name ${ptp_file_name}_toollists
if {!} {
set ino 1
if {} {
MOM_remove_file $tool_lists_file_name
}
}
set tfile
puts $tfile "(T$tt $mom_tool_name D$tdi R$trz )"
set ino
close $tfile
global ptp_file_name
set tmp_file_name "${ptp_file_name}_"
if {} {
MOM_remove_file $tmp_file_name
}
MOM_close_output_file $ptp_file_name
file rename $ptp_file_name $tmp_file_name
set ifile
set ofile
set tool_lists_file_name ${ptp_file_name}_toollists
global mom_sys_max_travel
global mom_sys_min_travel
set ttfile
#puts $ttfile " (zmax= zmin=)"
global mom_machine_time
#puts $ttfile "(time=[ format"%.2f" $mom_machine_time]MIN)"
close $ttfile
set ttfile
global mom_output_file_basename
global mom_part_name
global mom_date
puts $ofile "%"
#puts $ofile "(Graph file path:$mom_part_name)"
set datee -format "%Y.%m.%d %H:%M week%w"]
puts $ofile "($datee)"
set buf ""
while { > 0 } {
puts $ofile $buf
}
set buf ""
while { > 0 } {
puts $ofile $buf
}
close $ifile
close $ofile
close $ttfile
MOM_remove_file $tmp_file_name
MOM_remove_file $tool_lists_file_name
MOM_open_output_file $ptp_file_name
页:
[1]