作者: wreak* 时间: 2011-7-16 09:26
我的也是这个问题作者: fengzi2005* 时间: 2011-7-16 10:04
我还以为就我一个人有这种问题呢，郁闷作者: chnagge 时间: 2011-7-16 12:03
我的也是同样问题呀！！郁闷。
R20就很好。作者: lzl1992 时间: 2011-7-20 13:24
有个英文的说明，看不懂啊，看懂应该就能用了作者: lzl1992 时间: 2011-7-20 13:24
HOW TO GET THE TARGET ID OF YOUR MACHINE
========================================
If you want to run the software with a nodelock license, you need to
provide the target ID of your machine when ordering the license key.
The following explains how to obtain this ID.
1. IF USING NEW DSLS LICENSING MODE
-----------------------------------
The target ID is a character string composed of 3 letters, followed by a dash,
followed by 16 hexadecimal characters.
ex: GTF-E502DD633AF579A0
1/ Open a Command Prompt window and go to the CDROM drive root folder.
2/ Run "DSLicTarget.exe -t"
This will display the target ID of the machine.
The target ID is also displayed:
- in the Tools/Options/Licensing panel when running the application.
- in the Nodelock Key Management (DSLS) tool, from Start/Programs/CATIA/Tools.
2. IF USING LEGACY LICENSING MODE (LUM)
---------------------------------------
From an Explorer window, go to the CDROM drive root folder and
double-click on i4tgtid.exe.
A message box containing the win32mac target ID of the machine is displayed.
The target ID is a character string composed of 8 hexadecimal characters.
Make sure that the string "win32mac" is also displayed alongside the target ID.
ex: 1C39FA57 win32mac
Depending on the network configuration of your machine, the win32mac target ID
might not be available or might be equal to 00000000.
In this case, you have to use another tool, i4target.exe, in command-line mode:
1/ Open a Command Prompt window and go to the CDROM drive root folder.
2/ Run "i4target.exe -z"
This will list enabled network adapter GUIDs that can be used for the target ID.
2/ Run "i4target -v"
This will help to map GUIDs to more friendly names.
3/ Run "i4target.exe -d {12345678-90AB-CDEF-1234-567890ABCDEF}"
where {12345678-90AB-CDEF-1234-567890ABCDEF} matches the desired network adapter GUIDs.
4/ Run i4target.exe or i4tgtid.exe
You should obtain a win32mac target ID.
Note: Do not repeat step 2 once you have a valid win32mac target ID.
The target ID is also displayed:
- in the Tools/Options/Licensing panel when running the application.
- in the Nodelock Key Management tool (LUM), from Start/Programs/CATIA/Tools.作者: kgdaniq* 时间: 2011-7-25 21:39
我的是直接点确定，等几秒钟就可以正常使用了。作者: changge* 时间: 2011-7-26 14:53
我的也是，没办法，换回R20.作者: xuhailong* 时间: 2011-7-30 16:56
正在安装，试一下作者: h342981889* 时间: 2011-7-31 13:42
我怎么安装不了啊！！cd3 有问题啊！！作者: changge* 时间: 2011-8-4 09:47
是呀，单击“确定”就退出了！！！！
求解决办法！！作者: chxi88* 时间: 2011-8-13 15:10
单击“确定”就退出了！！！！
求解决办法！！作者: ruey000 时间: 2011-9-3 16:41
我也是 真是不好办作者: ruey000 时间: 2011-9-3 16:41
我也是 真是不好办作者: 南山松柏 时间: 2011-10-14 18:16
大哥您的CATIA V5R21 SP1 Win64 升级程序是怎么安装啊！没找到setup啊！！作者: 精诚网小睿 时间: 2011-10-27 13:33
