DASS CATIA P3 V5R21 SP0 安装起来了，但是打开出错

fengzi2005*

DASS CATIA P3 V5R21 SP0 安装起来了，但是打开出错

czjmjym

确定后随便勾选几个许可就可以了！

lc7410*

学习了！！！

wxf3792*

正如2楼所说，随便勾选几个许可，确定后即可正常使用

fengzi2005*

按你们说的做，还是不行

wreak*

我的也是这个问题

fengzi2005*

我还以为就我一个人有这种问题呢，郁闷

chnagge

我的也是同样问题呀！！郁闷。
R20就很好。

lzl1992

有个英文的说明，看不懂啊，看懂应该就能用了

lzl1992

HOW TO GET THE TARGET ID OF YOUR MACHINE
========================================

If you want to run the software with a nodelock license, you need to
provide the target ID of your machine when ordering the license key.
The following explains how to obtain this ID.

1. IF USING NEW DSLS LICENSING MODE
-----------------------------------

The target ID is a character string composed of 3 letters, followed by a dash,
followed by 16 hexadecimal characters.
ex: GTF-E502DD633AF579A0

1/ Open a Command Prompt window and go to the CDROM drive root folder.

2/ Run "DSLicTarget.exe -t"
   This will display the target ID of the machine.

The target ID is also displayed:
- in the Tools/Options/Licensing panel when running the application.
- in the Nodelock Key Management (DSLS) tool, from Start/Programs/CATIA/Tools.

2. IF USING LEGACY LICENSING MODE (LUM)
---------------------------------------

From an Explorer window, go to the CDROM drive root folder and
double-click on i4tgtid.exe.
A message box containing the win32mac target ID of the machine is displayed.
The target ID is a character string composed of 8 hexadecimal characters.
Make sure that the string "win32mac" is also displayed alongside the target ID.
ex: 1C39FA57 win32mac

Depending on the network configuration of your machine, the win32mac target ID
might not be available or might be equal to 00000000.
In this case, you have to use another tool, i4target.exe, in command-line mode:

1/ Open a Command Prompt window and go to the CDROM drive root folder.

2/ Run "i4target.exe -z"
   This will list enabled network adapter GUIDs that can be used for the target ID.

2/ Run "i4target -v"
   This will help to map GUIDs to more friendly names.

3/ Run "i4target.exe -d {12345678-90AB-CDEF-1234-567890ABCDEF}"
   where {12345678-90AB-CDEF-1234-567890ABCDEF} matches the desired network adapter GUIDs.

4/ Run i4target.exe or i4tgtid.exe
   You should obtain a win32mac target ID.

Note: Do not repeat step 2 once you have a valid win32mac target ID.

The target ID is also displayed:
- in the Tools/Options/Licensing panel when running the application.
- in the Nodelock Key Management tool (LUM), from Start/Programs/CATIA/Tools.