MasterCAM车加工模块怎么让后处理输出车加工名称

200014

怎么让后处理出来的程序开头输出加工模板名字，

1210631362

51 Face contouring (C axis)
52 Cross contouring (C axis)
53 C axis contouring
55 Face drilling (C axis)
56 Cross drilling (C axis)
57 C axis drilling
60 Rough
61 Finish
62 Grooving (note that chained grooves use 68.)
63 Threading
64 Drill
65 Point
66 Facing
67 Cutoff
68 Plunge rough; also, chained grooves
69 Manual entry
70 Merged in ASCII NCI
71 Lathe dynamic rough
72 Lathe contour rough
73 PrimeTurning™
201 Canned finish
202 Canned rough
203 Canned rough and finish
204 Canned rough face
205 Canned rough and finish face
206 Canned pattern repeat rough
207 Canned pattern repeat rough and finish
208 Canned groove rough
209 Canned groove finish
210 Quick rough
211 Quick finish
212 Quick groove
213 C-hook generated
214 Stock transfer
215 Stock flip
216 Bar feed
217 Chuck clamp/unclamp
218 Tailstock operation
219 Steadyrest operation
220 Pinch-turn operation
221 Custom operation with tool
222 Custom operation without tool
223 Custom operation reference
224 Plunge turn (chained geometry)
225 Plunge turn (point geometry)
226 Turret park operation
227 Custom threading

wanmeiaiqing

论坛大佬前几天不是刚刚发过了？

寻找@翔

是不是这样的  前几天有人写了   你参考一下https://www.ugsnx.com/thread-342920-1-2.html

200014

寻找@翔 发表于 2024-6-3 07:59
是不是这样的  前几天有人写了   你参考一下https://www.ugsnx.com/thread-342920-1-2.html

我不知道车的那个位置代码是多少铣的我有，而且改成中文了，所以有偿

200014

wanmeiaiqing 发表于 2024-6-3 07:49
论坛大佬前几天不是刚刚发过了？

车的不知道数字是多少

寻找@翔

200014 发表于 2024-6-3 10:07
我不知道车的那个位置代码是多少铣的我有，而且改成中文了，所以有偿

把前面7 改乘1   2    3试一下   一个个试

200014

寻找@翔 发表于 2024-6-3 15:20
把前面7 改乘1   2    3试一下   一个个试

没有。

200014

1210631362 发表于 2024-6-4 16:11
51 Face contouring (C axis)
52 Cross contouring (C axis)
53 C axis contouring

方便加一下吗，发个包

200014

1210631362 发表于 2024-6-4 16:11
51 Face contouring (C axis)
52 Cross contouring (C axis)
53 C axis contouring

好像没有固有粗车跟精:kuqi: