UG爱好者

标题: UG四轴编程钻孔时参考高度怎么设置 [打印本页]

作者: liang4115 时间: 2014-11-8 16:48
标题: UG四轴编程钻孔时参考高度怎么设置
UG四轴编程，钻孔时参考高度怎么设置；与R点不一样。
%
(MJ17-01-1主镜筒)
(OPETATION NAME: SPOT_DRILLING)
(CREATE DATE: Sat Nov 08 16:46:46 2014)
G40 G17 G49 G80 G90 G21
G0 G91 G30 Z0.0 Y0.0
M01
N1 (D1.5-CD)
T01 M06
(Tool_No:1)
G90 G54
/M08
G00 X-103.4 Y0.0 A79. S2100 M03
G43 Z18. H01
G98 G81 Z13.5 R18. F110.
X-109.4
X-95. A60.
A16.
X-97.98 A342.
X-103.98
X-103.4 A152.
X-109.4
X-103.98 A254.
X-97.98
X-91.98
G80
/M09
M05
G0 G91 G30 Z0.0 Y0.0
(Total Time = 0.68min )
(===============================================================================================)
( T O O L L I S T )
(===============================================================================================)
(===============================================================================================)
M02

欢迎光临 UG爱好者 (https://www.ugsnx.com/)