UG爱好者

标题: MasterCAM车床后处理想要程序输出余量值求ID号 [打印本页]

作者: 爺¤de寵妃* 时间: 2022-11-22 09:33
标题: MasterCAM车床后处理想要程序输出余量值求ID号
想要程序输出这些余量值。求ID号

作者: Jebens 时间: 2022-11-22 10:02
余量是stock

作者: 爺¤de寵妃* 时间: 2022-11-22 10:17

Jebens 发表于 2022-11-22 10:02
余量是stock

留个联系方式吧弄包烟抽抽

作者: 爺¤de寵妃* 时间: 2022-11-22 11:58

Jebens 发表于 2022-11-22 10:02
余量是stock

能具体点儿吗怎么输出这些余量值到程序里面

作者: qingg 时间: 2022-11-22 14:25
打开没有改过的后处理就看有余量显示了

作者: qingg 时间: 2022-11-22 14:26
fmt "TOOL - "    4 tnote #Note format
fmt "DIA. OFF. - " 4 toffnote #Note format
fmt "LEN. - "    4 tlngnote #Note format
fmt "TOOL DIA. - " 1 tldia$ #Note format
fmt "XY STOCK TO LEAVE - " 2  xy_stock #Note format
fmt "Z STOCK TO LEAVE - "  2  z_stock  #Note format
# --------------------------------------------------------------------------
fmt    4 year2    #Calculated year value
fmt    18  time2    #Capture 24-hour time value into 'time2' variable
fmt    19  hour       #Hour
fmt    20  min       #Minutes
year2 = year$ + 2000

#endregion

#region Tool comment, tool table, manual entry output
# --------------------------------------------------------------------------
# Tool Comment / Manual Entry Section
# --------------------------------------------------------------------------
ptoolcomment #Comment for tool
   tnote = t$, toffnote = tloffno$, tlngnote = tlngno$
   if tool_info = 1 | tool_info = 3,
      sopen_prn, pstrtool, sdelimiter, *tnote, sdelimiter, *toffnote, sdelimiter, *tlngnote, sdelimiter, *tldia$, sclose_prn, e$

ptooltable    #Tooltable output
   sopen_prn, *t$, sdelimiter, pstrtool, sdelimiter, *tlngno$,
      [if comp_type > 0 & comp_type < 4, sdelimiter, *tloffno$, sdelimiter, *scomp_type, sdelimiter, *tldia$],
      [if xy_stock <> 0 | z_stock <> 0, sdelimiter, *xy_stock, sdelimiter, *z_stock],
      sclose_prn, e$
   xy_stock = 0  #Reset stock to leave values
   z_stock = 0 #Reset stock to leave values

作者: 爺¤de寵妃* 时间: 2022-11-23 12:52

qingg 发表于 2022-11-22 14:26
fmt "TOOL - " 4 tnote #Note format
fmt "DIA. OFF. - " 4 toffnote #Note format
fmt "LEN ...

感谢分享好汉留下姓名

欢迎光临 UG爱好者 (https://www.ugsnx.com/)