UG8.0逼近刀如何设置
本人小白一个，最近一直在搞研究UG逼近刀但是怎么也搞不出来，希望有大神能帮帮我，下面是我抄master cam的刀路，不知道UG能不能像master cam这样进刀！N100G21
N106G0G90G54X-102.4Y1301500M3
N108G43H1Z80. 这里先到安全距离80
N7332X-102.4Y130.
N7334Z5.1 然后从5.1开始逼近
N7336G1Z.1F600.
N7338X-102.5Y131.871Z.094F2000.
N7340X-102.798Y133.72Z.088
N7342X-103.291Y135.528Z.082
N7344X-103.973Y137.273Z.076
…………。一个不孔铣完了到下一个孔
N1172G1Z-47.5F6000.
N1174G0Z80. 还是先快速移动到80
N1176X107.85Y9.1
N1178Z5.1 然后又从5.1开始逼近
N1180G1Z.1F600.
N1182X-160.5Z-.036F2000.
N1184X-160.8Y9.02
N1186X-161.02Y8.8
页:
[1]